Summer Starts Here - Save up to 70%
Trailer Brake Controller Installation - 2013 Mercedes-Benz Sprinter- Video
Today on our 2013 Mercedes Benz Sprinter, we'll be installing the Tekonsha Prodigy P2 brake controller, part number 90885, in conjunction with the etrailer Brake Controller Install Kit part number, ETBC7, our tow rating mounting bracket, part number 18136, and the Edelmann dielectric grease, part number 11755. To begin our install, we'll first take the seven-pole bracket and mount it onto the seven-pole connector. Using the hardware provided with our install kit, we'll go ahead and line the bracket up with the pre-drilled holes in the connector, then install our bolt and nut to secure the bracket to the connector. We'll go ahead and lower the spare tire. Remove the T-nuts at the ends of the studs and then go ahead and loosen the nuts that secure the spare tire in position. Once we can loosen the nuts enough, we'll rotate the hook out of the way and then lower the cradle. Next we'll need to install the seven-pole bracket onto the vehicle. Now, for this application, we'll be using the tow-ready universal mounting bracket part number 18136. Because of the aftermarket body on this vehicle, we cannot install it in a normal fashion. more
2/17/2015 12:00:19 PM
Trailer Brake Controller Installation - 2014 Mercedes-Benz Sprinter- Video
Today in this Mercedes Benz Sprinter Van, were going to install part number 90885 from Tekonsha. To help us to install our brake controller, were also going to use part number ETBC7. Were going to need another part which is a bracket for us to install our 7-pole connector bracket. Thats going to be part number 18136. Lets do a manual override. You can see how it scrolls the numbers so that works. more
9/24/2014 5:40:35 AM
Filter Videos
Filter Videos
